Lidarr FAQ

From Servarr

How does Lidarr work?

anchor

  • Lidarr relies on RSS feeds to automate grabbing of releases as they are posted, for both new releases as well as previously released releases being released or re-released. The RSS feed is the latest releases from a site, typically between 50 and 100 releases, though some sites provide more and some less. The RSS feed is comprised of all releases recently available, including releases for requested media you do not follow, if you look at debug logs you will see these releases being processed, which is completely normal.
  • Lidarr enforces a minimum of 10 minutes on the RSS Sync interval and a maximum of 2 hours. 15 minutes is the minimum recommended by most indexers, though some do allow lower intervals and 2 hours ensures Lidarr is checking frequently enough to not miss a release (even though it can page through the RSS feed on many indexers to help with that). Some indexers allow clients to perform an RSS sync more frequently than 10 minutes, in those scenarios we recommend using Lidarr's Release-Push API endpoint along with an IRC announce channel to push releases to Lidarr for processing which can happen in near real time and with less overhead on the indexer and Lidarr as Lidarr doesn’t need to request the RSS feed too frequently and process the same releases over and over.

Why does Lidarr only show studio albums, How do I find singles or EPs?

anchor
Lidarr defaults to only bringing in studio albums for each artist. However, you can expand the album types per an artist, or for your entire library by utilizing Metadata Profiles.

Why can't I add a various artists album?

anchor
Various Artists and other meta artists on Musicbrainz are due to the number of entries they provide.

Can I add just an album?

anchor
Not at the moment.

Can I download single tracks?

anchor
Lidarr works by searching for and downloading full releases, therefore individual tracks cannot be downloaded unless they were released as a single by the artist.

Why doesn't artist X show up in search?

anchor
Search is still a work in progress. Artists that don't show up in search may be added by searching for `lidarr:mbid` where `mbid` is the Musicbrainz ID of the artist.

Lidarr matched an album with too many tracks. How can I change the Album to the correct Release?

anchor
Open the Album details page and select the Edit Icon in the top nav. There you can find a dropdown of all releases tied to that Album.

I'm having trouble importing my artists, what could it be?

anchor
The artist import process just imports the Artist names and path locations, which are then stored in the database so that a) metadata can be retrieved and b) downloaded content can be put in the same location in future. To this end, the user account that Lidarr runs under needs both read and write to your data directory.


General FAQs

Can I update Lidarr inside my Docker container?

anchor

  • Technically, yes. But you should absolutely not. It is a primary philosophy of Docker. Database issues can be caused for Lidarr if you upgrade your installation inside to the most recent nightly, then update the docker container itself which might downgrade to an older version.

Help, My Mac says Lidarr cannot be opened because the developer cannot be verified

anchor

  • This is simple, please see this link for more information here
Developer Cannot be verified
Developer Cannot be verified

Help, My Mac says Lidarr.app is damaged and can’t be opened

That is either due to a corrupt download so try again or security issues, please see this related FAQ entry.

How do I request a feature for Lidarr?

anchor
This is an easy one click here

I am getting an error: Database disk image is malformed

anchor

  • Another possible cause of you getting an error with your Database is that you're placing your database on a network drive (nfs or smb or something else not local). Simple answer to this is to not do this as SQLite and network drives not typically play nice together and will cause a malformed database eventually. Lidarr's config folder must be on a local drive. If you're trying to restore your database you can check out our Backup/Restore guide here.
  • If you are using mergerFS you need to remove direct_io as sqlite uses mmap which isn’t supported by direct_io as explained in the mergerFS docs here

I use Lidarr on a Mac and it suddenly stopped working. What happened?

anchor
Most likely this is due to a MacOS bug which caused one of the Lidarr databases to be corrupted.

Follow these steps to resolve

Then attempt to launch Lidarr and see if it works. If it does not work, you'll need further support. Post in our reddit or hop on discord for help.

Why can’t Lidarr see my files on a remote server?

anchor

In short: the user Lidarr is running as (if service) or under (if tray app) cannot access the file path on the remote server. This can be for various reasons, but the most common is, Lidarr is running as a service, which causes one of two things:


  1. Lidarr runs under the LocalService account by default which doesn’t have access to protected remote file shares.

    Solutions:

  2. You’re using a mapped network drive (not a UNC path)

    Solutions:

    • Change your paths to UNC paths (\\server\share)
    • Run Lidarr.exe via the Startup Folder

Mapped Network Drives vs UNC Paths

anchor

  • Using mapped network drives generally doesn’t work very well, especially when Lidarr is configured to run as a service. The better way to set shares up is using UNC paths. So instead of X:\Movies use \\Server\Movies\.
  • A key point to remember is that Lidarr gets path information from the downloader, so you’ll also need to setup NZBGet, SABNzbd or any other downloader to use UNC paths too.

How do I Backup/Restore my Lidarr?

anchor

Backing up Lidarr

  • Using built-in backup
  1. Go to System: Backup in the Lidarr UI
  2. Click the Backup button
  3. Download the zip after the backup is created for safekeeping

Backup Lidarr

  • Using file system directly
  1. Find the location of the AppData directory for Lidarr
  2. Stop Lidarr - This will prevent the database from being corrupted
  3. Copy the contents to a safe location

Restoring from Backup

Restoring to an OS that uses different paths won’t work (Windows to Linux, Linux to Windows, Windows to OS X or OS X to Windows), moving between OS X and Linux may work, since both use paths containing / instead of \ that Windows uses, but is not supported.

  • Using zip backup
  1. Re-install Lidarr
  2. Run Lidarr
  3. Navigate to System > Backup
  4. Select Restore Backup
  5. Select Choose File
  6. Select your backup zip file
  7. Select Restore

750px

  • Using file system backup
  1. Re-install Lidarr
  2. Run Lidarr once to get the AppData directory location
  3. Stop Lidarr
  4. Delete the contents of the AppData directory (Including the .db-wal/.db-journal files if they exist)
  5. Restore from your backup
  6. Start Lidarr
  7. As long as the paths are the same, everything will pick up where it left off
  • Restore for Synology NAS

CAUTION: Restoring on a Synology requires knowledge of Linux and Root SSH access to the Synology Device.

  1. Re-install Lidarr

  2. Run Lidarr once to get the AppData directory location

  3. Stop Lidarr

  4. Connect to the Synology NAS through SSH and log in as root

  5. Execute the following commands:

    rm -r /usr/local/{{{ARRNAME}}}/var/.config/{{{ARRNAME}}}/{{{ARRNAME}}}.db*
    cp -f /tmp/{{{ARRNAME}}}_backup/* /usr/local/{{{ARRNAME}}}/var/.config/{{{ARRNAME}}}/
  6. Update permissions on the files:

    cd /usr/local/{{{ARRNAME}}}/var/.config/{{{ARRNAME}}}/
    chown -R {{{ARRNAME}}}:users *
    chmod -R 0644 *

    On some installations, the user is different: chown -R sc-Lidarr:Lidarr *

  7. Start Lidarr

Help I have locked my self out

anchor
To disable authentication (to reset your username or password) you will need need to edit config.xml which will be inside the Lidarr Appdata Directory.

  1. Open config.xml in a text editor
  2. Find the authentication method line will be
<AuthenticationMethod>Basic</AuthenticationMethod>
or
<AuthenticationMethod>Forms</AuthenticationMethod>
  1. Change the AuthenticationMethod line to <AuthenticationMethod>None</AuthenticationMethod>
  2. Restart Lidarr
  3. Lidarr will now be accessible without a password, you should go the Settings: General in the Lidarr UI and set your username and password

Help I have forgotten my password

anchor

  • Please see steps listed in here.

Jackett shows more results than Lidarr when manually searching

anchor
This is usually due to Lidarr searching Jackett differently than you do. See this troubleshooting article for further information.

Weird UI Issues

anchor

  • If you experience any weird UI issues like the Library page not listing anything or a certain view or sort not working, try viewing in a Chrome Incognito Window or Firefox Private Window. If it works fine there, clear your browser cache and cookies for your specific ip/domain. For more information, see the Clear Cache Cookies and Local Storage wiki article.

Web Interface Only Loads at localhost on Windows

anchor

Permissions

anchor

  • Lidarr will need to move files away from where the downloader puts them into the final location, so this means that Lidarr will need to read/write to both the source and the destination directory and files.
  • On Linux, where best practices have services running as their own user, this will probably mean using a shared group and setting folder permissions to 775 and files to 664 both in your downloader and Lidarr. In umask notation, that would be 002.

System & Logs loads forever

anchor
It's the easy-privacy blocklist. They basically block any url with /api/log? in it. Look over the list and tell me if you think that blocking all the urls in that list is a sensible idea, there are dozens of urls in there that potentially break sites. You selected that in your adblocker. Easy solution is to whitelist the domain Sonarr is running on. But I still recommend checking the list.

Finding Cookies

anchor
Some sites cannot be logged into automatically and require you to login manually then give the cookies to Lidarr to work. This page describes how you do that.

  • Chrome
    Chrome cookies
    Chrome cookies
  • Firefox
    Firefox cookies
    Firefox cookies

Unpack Torrents

anchor
Most torrent clients doesn’t come with the automatic handling of compressed archives like their usenet counterparts. We generally recommend unpackerr.

uTorrent is no longer working

anchor

  1. Ensure the Web UI is enabled
  2. Turn on Web UI
  3. Ensure that the Alt Listening Port (Advanced -> Web UI) is not the same as the Listening Port (Connections)
  4. We'd suggest changing the Web UI Alt Listening Port so as to not mess with any port forwarding for connections.
  5. Utorrent-webui-settings2.png

    Utorrent-webui-settings3.png

Does Lidarr require a SABnzbd post-processing script to import downloaded episodes?

anchor

No. Lidarr will talk to your download client to determine where the files have been downloaded and will import them automatically. If Lidarr and your download client are on different machines you will need to use Remote Path Mapping to link the remote path to a local one so Lidarr knows where to find the files.

I got a pop-up that said config.xml was corrupt, what now?

anchor

Lidarr was unable to read your config file on start-up as it became corrupted somehow. In order to get Lidarr back online, you will need to delete .xml in your | AppData Folder, once deleted start Lidarr and it will start on the default port (8686), you should now re-configure any settings you configured on the General Settings page.

Invalid Certificate and other HTTPS or SSL issues

anchor

Your download client stopped working and you're getting an error like `Localhost is an invalid certificate`?

Lidarr now validates SSL certificates. If there is no SSL certificate set in the download client, or you're using a self-signed https certificate without the CA certificate added to your local certificate store, then Lidarr will refuse to connect. Free properly signed certificates are available from let's encrypt.

If your download client and Lidarr are on the same machine there is no reason to use HTTPS, so the easiest solution is to disable SSL for the connection. Most would agree it's not required on a local network either. It is possible to disable certificate validation in advanced settings if you want to keep an insecure SSL setup.

VPNs, Jackett, and the *ARRs

anchor

Unless you're in a repressive country like China, Australia or South Africa, your torrent client is typically the only thing that needs to be behind a VPN. Because the VPN endpoint is shared by many users, you can and will experience rate limiting, DDOS protection, and ip bans from various services each software uses.

In other words, putting the *Arrs behind a VPN can and will make the applications unusable in some cases due to the services not being accessible. To be clear it is not a matter if VPNs will cause issues with the *Arrs, but when: image providers will block you and cloudflare is in front of most of arr servers (updates, metadata, etc.) and liable to block you too

In addition, some private trackers *ban* for browsing from a VPN, which is how Jackett works. In some cases (i.e. certain UK ISPs) it may be needed to use a VPN for public trackers, in which case you should then be putting only Jackett behind the VPN. However, you should not do that if you have private trackers without checking their rules first. Many private trackers will ban you for using or accessing them (i.e. using Jackett) via a VPN.